How to replace your paper screen protector

How to replace your paper screen protector

When the doodroo paper texture screen protector needs to be changed, you won't have to buy another one: there are two included in the package. This way, you will immediately have one available for free when you need to replace it. The process is very simple and requires no special skills or tools. Let's take a look at it together 💛

Answering your top 3 questions Reading How to replace your paper screen protector 5 minutes Next How to take notes on a tablet?

REMOVE THE WORN-OUT SCREEN PROTECTOR

The doodroo screen protector can be easily removed. Its adhesive, in fact, is strong enough to keep it glued to the screen for a very long time and, despite the resistant material, removing it is simple by following a few quick steps:

✔ Scratch the corner of the paper texture screen protector with your nails 

✔ At this point, the corner should have lifted slightly from the screen. Grab the part that has lifted off with your index finger and thumb

✔ By pulling towards the opposite side of your device, the screen protector will detach itself completely from the Apple iPad, tablet or Amazon Kindle. 

BONUS: if the screen protector is damaged, it may break during the process, but don't worry: repeat the procedure from another angle until the entire paper texture screen protector has been removed 💯

What not to do:

❌ Don't try to wet it to soften it: you could damage your device

❌ Don't use a cutter, scissors or other sharp objects to you avoid scratching your device's screen

 

APPLYING THE NEW DOODROO SCREEN PROTECTOR

First, find a well-lit flat surface and clean your tablet's screen. Afterwards, you can apply the new screen protector very easily thanks to the tools included in the package. In fact, you will find a series of stickers to remove every speck of dust, as well as a practical spatula to best apply the screen protector and remove any air bubbles. The entire process is guided, step by step. Here's the advanced guide on how to apply a doodroo paper texture screen protector:

1. Place the UNOPEN screen protector on the device screen

As soon as you open the package you will find the screen protector closed by the two fake films which, only at the end, will be removed to apply the real screen protector to the device. In this step, you will have to place the closed screen protector on the device, taking care to align the device's edges, the camera and the sensors.

 


2. Fix the screen protector to the flat surface on which the device is resting

It's harder said than done: using the included stickers, fix the screen protector positioned on the device to the surface of the table, desk or any other flat and smooth surface which you are using to apply it.

 

3. Move the device towards the stickers for fixing the screen protector from the surface to the device

With a light, fluid and slow movement, slide the device towards the stickers. In this way, the screen protector will be fixed to one side of the device.

 



4. Place the appropriate sticker on the screen protector and lift it

In this step, the special rounded blue sticker allows you to lift the previously fixed screen protector, leaving the screen free.

 


5. Clean the display using the included tools

Now that you have freed the display, clean it any of dust, impurities and dirt. This step is very important because it ensures a perfect application on the display. In the package you will find various tools to best clean the display. Use the damp cloth to clean the screen

 


Use the dry cloth to dry it and remove any streaks

 


The last cleaning step allows you to remove the last remnants of dust that could leave impurities on the screen protector. Close the appropriate sticker in the shape of a parallelepiped on itself and place two fingers inside. Now use it to remove any remaining dust or dirt with dabbing movements. Inside the package there are 2 special stickers.

 

6. Remove the first fake film using the red sticker

Take the red sticker and remove the internal screen protector.



7. Close the screen protector on the device screen

Close it on the display as if it were a book. In this way, you will have opened the screen protector and you will have definitively applied it to the display of your iPad, Onyx Boox, Microsoft Surface, Kindle, remarkable or Samsung Galaxy TAB. 

 



8. Use the included squeegee to remove any air bubbles

There are two spatulas in the package: pass one over each air bubble to remove them. Now the doodroo screen protector is applied perfectly to your device..

 



9. Remove the fake outer film

As a final step, pass the last fake blue film with the domed sticker used in step 4. 

 



10. Write and draw as if on a sheet of paper

Enjoy your new doodroo paper texture screen protector!!!


Watch the video:

 


You don't have your very own doodroo paper texture screen protector yet? Buy it as part of a bundle at an exclusive price.

SUBSCRIBE TO OUR NEWSLETTER 📌

Receive a 15% discount and ongoing updates on the digital art world! 💛

Leave a comment

All comments are moderated before being published.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.